NEU - T-Verbindung - für unsere Teleskopstangen zum Ausziehen bis 210cm. Sie wird benötigt, um 2 Verbindungsstangen auf der Längsseite zu verbinden. Sie wird einfach auf die (vorhandene) Teleskopstange gesteckt und verschraubt. Diese Rahmenkonstruktion erhöht wesentlich die Stabiliät ihrer Balkonvernetzung. Einfache Montage.

Für weitere Informationen bitte das Bild anklicken

NEU - Kreuz-Verbindung - passend zu unsere Rahmen - Verbindungsstgangen. Diese Kreuz-Verbindung wird benötigt, um dem Rahme eine höhere Stabiltät zu geben - siehe Zeichnung. (nur geeignet für unsere Teleskopstangen zum Ausziehen und Verbindungsstangen)

Für weitere Informationen bitte das Bild anklicken

NEU - Seiten-Winkel Verbindung - passend zu unserem Rahmen-System. (für Teleskopstangen zum Ausziehen und Verbindungsstangen)

Für weitere Informationen bitte das Bild anklicken

You need this screw set if you want to attach a Connecting Part of our Net Frame to our extendable telescopic rod. 

Adjustable connecting rod from 100 to 150cm. In combination with our other connecting rods, the required frame size can be precisely adapted.

For further information please click on the picture

Telescopic rod mount made of hardened aluminu, black anodized, for balconies with a square handrail with an edge length between 4,0 and 6,0cm. This bracket will be fixed to the railing with 2 screws only. This mount is suitable only for our extendable Boy-Telescopic rods with a diameter of 19mm.
Available in black only.

For further information please click on the photo.

Telescopic rod holder made of hardened aluminum, black anodized, for balconies with a square handrail with an edge length between 60 to 85mm. This bracket will be fixed - without drilling - with 2 screws on the handrail. This rod holder is only suitable for our Boy-Telescopic rods with a diameter of 19mm. 

Colour: black.

For further information please click on the photo.

Telescopic rod holder, made of hardened aluminum, black anodized, for balconies whith a round handrail. These brackets will be installed with 2 screws on the handrail of the balcony railing. Suitable for hand rails with a diameter between 30 to 60mm only.

For further information please click on the photo.

Telescopic rod holder, made of hardened aluminum, black anodized, stainless steel, for balconies with a round handrail. These brackets without drilling secured with 2 screws on the handrail of the balcony railing. Suitable only fürHandläufe up to a diameter of max. 6cm.

For further information please click on the photo.

With this sturdy corner mounting our BOY telescope bars are optimally mounted into the corner of your balcony. It will be fixed with 4 strong screws to the wall.
Suitable only for our BOY telescopic rods with a diameter of 19mm.

Available in the colors: white, black and silver zink plated

Heavy Duty Lawn Mounts for our extendable telescopic poles. Same style as our normal mounts but the thickness of the walls is almost doubled and therefor much stronger.

Prices
Length - 30cm: Euro 15.95
Length - 50cm: Euro 18.95

For further information please click on the picture or the button 'Learn more

Matching lawn mounts for our olive green enlosure rods. Available in 30cm or 50cm

Color: galvanized

Prices
Length - 30cm: Euro 10.45
Length - 50cm: Euro 13,95

For further information please click on the picture or the button 'Learn more'

Optimal lawn support for our extendable telescopic bars. They are hit 30cm deep into the lawn and give the telescopic rod a firm hold. For soft soils, we recommend the extra long lawn mount with a length of 50cm. Very usefull if you want to build a cat enclosure with our telescopic poles. You also can use them together with the rods to secure your garden and terrace. Suitable for all BOY telescopic rods with 19mm Ø.

Color: zinc galvanized

Prices
Length - 30cm: Euro 15.95
Length - 50cm: Euro 18.95  

For further information please click on the picture or the button 'Learn more'

Strong wall mounts for the extendable BOY-telescopic rod. It is suitable for all walls and parapets, in which you may drill holes. This wall mount has to be fastened with 4 screws. Suitable for telescopic rods with a diameter of 19mm only.

Available in the colors : white, black and zink plate

With this sturdy corner mounting our BOY telescope bars are optimally mounted into the corner of your balcony. It will be fixed with 4 strong screws to the wall.
Suitable only for our BOY telescopic rods with a diameter of 19mm.

Available in the colors: white, black and silver zink plated

Telescopic rod holder - suitable for any right-angled floor corner. The bottom plate has the shape of a right triangle and therefore. It is anchored by two strong screws into the ground. This mounting is suitable only for our BOY-telescopic rods with a outer diameter of 19mm.

Available in the colors: white, black and silver zink plated

Wall clamp for telescopic rods with a max. Ø 23mm to be fixed onto walls without drilling. This clamp provides a strong hold to the telescopic rods.

Telescopic rods are the most commonly fixtures used for attaching cat netting on balconies, terraces and gardens. Our rods are very stable and strong in order to with stand wind and weather. Our telescopic rods are made from reinforced steel with a wall gauge of 1 mm and the diameter of the rod is 19mm - the inner rod 16mm.

Strong 3 pieces enclosure rod - olive green baked enamel finish - with a rod diameter of 25mm and a total length of 230cm. Colour match our olive green Cat-Nets.The optimal rod to built a cat-enclosure in your Garden.

For more information please click onto the photo.

This Telescopic Bar will be clamped between the balcony floor and ceiling. The easiest way to fix a Cat-Net without drilling to your balcony. You do not need any additional brackets to attach this telescopic rod. It can be used up to a ceiling height of 300cm.

Over climbing protection - total length approx. 95cm, tube diameter 19mm. Specially designed as over climbing protection for walls and screens. The overkill protection is fixed with 2 screws or with our wall bracket. In the upper section are two holes for tensioning the braid.

Available in the colors: galvanized
                                     olive green

For further information please click on the picture

This 45 degr. angled over climging protection for our extendable telescopic rods will prevent your cat from escaping over the Cat-Net.

This angled Top Part attachment prevents your cat climbing over the Cat-Net. A perfect addition to the enclosure rod.

Length-adjustable connecting rod with a total length from 10 up to 50cm.

2-part connecting rod, total length 200cm, suitable for our frame connections.

For further information please click on the picture

Adjustable connecting rod from 100 to 150cm. In combination with our other connecting rods, the required frame size can be precisely adapted.

For further information please click on the picture

Connecting rod, total length 100cm, matching our frame connections.

For further information please click on the picture

Solid strong woven rope with a diameter of 3mm and a length of 10m.

Available in : olive green and white.

Solid strong woven rope with a diameter of 3mm and a length of 20m.

Available in colors:  olive green and white.

Solid strong woven rope with a diameter of 3mm and a length of 100m. 

Available in the colors olive green and white.

Stainless Steel Cable kit includes a high quality stainless steel cable with a length of  4.50m and a Ø of 2mm. The stainless steel cable is already equipped with a loop on one side. The metal wire has a tensile strength of about 100Kg

Stainless Steel Cable Kit includes a high-quality steel cable with a length of 7.50m and a Ø of 3mm. The stainless steel cable is already equipped with a loop on one side. The metal cable has a tensile strength of about 200 Kg. All essential parts for mounting are included.

Stainless Steel Cable kit includes a high quality stainless steel cable with a length of 12.50m and a Ø of 3mm. The stainless steel cable is already equipped with a loop on one side. The metal wire has a tensile strength of about 200 Kg

Netzgarn verstärkt mit einem Edelstahlsdraht für unsere Katzennetze mit Drahtverstärkung

Garnstärke : 1,3mm
Länge         : 50m Rolle
Farben        : weiss und olivgrün

Net Yarn, to be used to tie the nets to railings or to telescopic rods. It has a diameter of appr. 1 mm and is 20m long. It is also very helpfull if you need to attach two pieces of nets together or if you have to repair it.

Available in the colors : olive green and white

Net Yarn with a diameter of 1,2mm and a length of approximate 250m  (250gr spool) . It is very usefull in order to attach nets together or to repair nets. It is also recommended to be used to tie the nets to railings or to poles.

This net needle is used to process the network yarn. It is the ideal tool for repairing and fixing the nets cat nets with our net yarn.

Lead rope with a weight of 200g per meter, will secure the cat-net onto the floor. It should be used for cat-nets in a enclosure and for net-curtains on the balcony.